www.topsporter.nl

Voor een permanente flexibele en waterdichte reparatie van nylon, neopreen, rubber, leer, PVC, PU en de meeste plastic soorten. GEAR AID / McNett Aquasure — De manier om snel scheuren en gaten te repareren. Kleur: transparant

“De wereld dichterbij”, vanuit: Zaterdag.nl & YouAre (.BE/.NL), 'founders' van Topsporter.nl; o.a. — De allerbeste keuze en beste online prijs! Dus ook via: www.AirTrack.shop & www.SeaRaft.shop (internationaal), voor Topathletes.com etc.

De lijm & kit tube van McNett Aquasure Neoprene voor stevige reparaties is een unieke samenstelling van urethaan rubber compound voor een superieure hechting, slijtvastheid, flexibiliteit en waterdichtheid.
Ongevoelig voor warmte of oplosmiddelen, Aquasure Repair Lijm & kit zal na het aanbrengen ervan uitharden tot een flexibel thermohardend rubber product.
Een Aquasure reparatie kan erna zelfs worden uitgerekt en gevouwen waarbij de reparatie terugspringt zonder ook maar het effect te ervaren van het opnieuw oplopen van schade op de desbetreffende behandelde plek en zal dus terugspringen naar zijn oorspronkelijke vorm.
De sterk geconcentreerde formule heeft een minimale krimp, waardoor dikke reparaties met slechts één permanente toepassing al volstaat.

Koop uw McNett Aquasure 28 gr voor de laagste prijs! Onze online winkel voor flik-flakken, rekken, strekken, salto's, freerunning, gymnastics, recreational gym, pre-school gymnastics, cheerleading, acrobatics, martial arts, elderly gym, fitness, etc: www.airtrack.shop (...zelfs internationaal) laat uw dromen uit komen! Vind absolute top AirTracks,  30% lichter,  sterker,  veerkrachtiger,  robuuster en met een perfecte afwerking voor onverslaanbare prijzen  (...kopen rechtstreeks van de allerbeste kwaliteitsfabrikant): Heytex GmbH Double WWall Fabric (DWF) & Extreme high quality Mehler GmbH PVC boat fabric. Neem een kijkje bij onze gedetailleerde product beschrijvingen en beoordelingen van andere klanten die McNett Aquasure 28 gr al gekocht hebben. Vind de laatste prijs verlagingen en ontdek al onze aanbiedingen in onze AirTrack shop (met enkel absolute toppers, die aan de strengste vereisten voldoen vandaag de dag) en dus in de TOP AirTrack catalogus voor geweldige prijzen daarvan!
 

McNett Aquasure Neoprene Glue Sealant (EN:)

 PU Glue

Aquasure is one of the best urethane based glues available on the market. Resistant and flexible will allow you to make strong and durable repairs on your Air-track, Sea-raft, kite's bladders, valves, canopy, dacron frames, windsurf and other sails.

Flexible urethane formula waterproofs, seals and protects against abrasion. Hundreds of watersports and household uses. Once cured, it's permanent. The repair will generally last the life of the item.

One 5g tube will allow you to make the first repair. Our 28 gram tube will do the job for sure!

 
Key Benefits

+ fast drying (your gear will be fixed overnight!)

+ extreme strength

+ heat – cold & humidity resistant

+ elastic (will breathe with fabrics)

+ clear

+ UV stable

+ no smell after fully cured

+ Meets latest EU regulation standards

+ Safe for use on: Neoprene, Hypalon®, Urethane, PVC, Rubber, and more.

 
It works also in the  enviroments, where other glues fail – extreme cold & heat, humidity, etc… We use only this glue in all how-to manuals, please check them for the usage!

Weight (netto): 28g.

Tip: If you want to speed up the cure process you can add a drop or two of fresh water into the mixture to speed up curing!

All in all: Perfect for repairing neoprene boots, wetsuits etc.

Therefore also the most popular way to repair Air Floors Boards Tracks, waders, etc. Repairs any type of Air product from PVC to nylon to neoprene.

    The most popular way to repair Air Floors Boards Tracks; Sea Rafts; etc.
    Clear supertough flexible polyurethane in a tube.
    Repairs any type of Air Floors Boards Tracks from PVC to nylon to neoprene.

With McNett Aquasure glue, you can easily repair tears and rips in your favorite waders, scuba gear, dive equipment, and outdoor gear.

Aquasure is a clear, waterproof adhesive and sealant, specially formulated for the flexibility, adhesion and abrasion protection you need when you’re in the water.

Don’t let a rip or a tear stop you. Aquasure will patch that hole in your wetsuit, fix the gash in your fishing waders, and make sure your drysuit keeps you dry.

Aquaseal is all you need to keep your gear going as long as you do.

Safe for use on: Neoprene, Nylon, GORE-TEX® fabric, Hypalon®, Urethane, Rubber, and more.
 
NOTE: Even though the surfaces of the AirTrack are made from extra strong  Heytex GmbH DWF and Mehler GmbH PVC boat fabric therefore still can be punctured if not used properly or if it is not layed on a leveled clean surface. We can however be prepared to face this eventuality so with your AirTrack comes a reparation kit, though could be extended with the amazing McNett Aquasure Neoprene Glue Sealant solution as well!

Simple and more complete reparation procedure (...using any other glue)

    Identify the puncture in the AirTrack and mark it with a pen, close by.
    Make a guiding area (beter even using guiding tape around the erea) on which you will apply the glue.
    Make sure the surface is clean and the guiding area has the same shape like the air floor boat raft fabric patch.
    Apply the glue on the air fabric patch. You can use a fine-toothed brush.
    Apply the glue on the AirTrack, inside the guiding area.
    After the glue has dried (ap-prox. 10-15 minutes) remove the guiding tape around.
    Put the patch on the area and start applying force.
    Apply force in one direction in order to get a good bond and to remove the air between the materials.
    Congratulations! Job well done.

In both cases and by using the supplied kit with the AirTrack or Searaft one can easily make a basically permanent repair to their track without professional support!

Directions for same and more simple neoprene repair:

    Clean Damaged Area
    Trim any loose threads
    Non-fabric surfaces should be roughened with sandpaper, then cleaned
    Apply Aquasure to surfaces directly from tube or with knife or flat stick
    Keep repair level overnight. Avoid contact with other surfaces.

Most repairs reach full strength overnight (10–14 hours). Allow longer for thickest repairs.

Directions for holes and tears instead:

    Clean Damaged Area
    Trim any loose threads, and/or use a piece of fabric as well to close the gap
    Non-fabric surfaces should be roughened with sandpaper, then cleaned
    Create backing with removable tape.
    Fill void and 1/4" beyond edge with McNett Aquasure. Remove tape after full cure.
    Keep repair level overnight. Avoid contact with other surfaces.

Most repairs reach full strength overnight (12–18 hours). Allow longer for thickest repairs.

Directions for seams:

    Clean Damaged Area
    Trim any loose threads
    Non-fabric surfaces should be roughened with sandpaper, then cleaned
    Apply 1/16" (2 mm) thick bead overlapping seams edges by at least 1/4" (6 mm).
    Apply with slight pressure to saturate fabric surfaces.
    Keep repair level overnight. Avoid contact with other surfaces.

Most repairs reach full strength overnight (12–18 hours). Allow longer for thickest repairs.

Directions for high wear areas:

    Clean Damaged Area
    Trim any loose threads
    Non-fabric surfaces should be roughened with sandpaper, then cleaned
    Apply thin coat with knife for flexible abrasion resistance.
    Apply with slight pressure to saturate fabric surfaces.
    Keep repair level overnight. Avoid contact with other surfaces.

Most repairs reach full strength overnight (12–18 hours). Allow longer for thickest repairs.
 

GEAR AID / McNett

As they transition to the GEAR AID brand, all of their great McNett products will still be available on McNett.com
 
McNett AquaSure Waterproof Glue for Gear & Clothing Seams

Aquasure® permanently bonds, seals and waterproofs hundreds of materials. This unique formula is the industry standard for maximum bond strength, abrasion resistance, flexibility and waterproofing. Physically, Aquasure is a high viscosity gel that cures to an extremely elasticated, clear urethane rubber. Since it is a thermoset urethane, cured Aquasure is impervious to solvents (such as petrol) or extremes of temperature (-40ºC to+200ºC). Aquasure is ideal for bonding neoprene, fabrics, latex, trilaminates, PVC, Hypalon®, natural and synthetic leather, foams, composites and many plastics. This specialized formula is ideal for sealing stitching and reinforcing high stress areas on wet suits, dry suits, Hypalon and PVC boats and hundreds of other items. Aquasure also makes an ideal abrasion patch for high wear areas such as knees, seats and luggage bottoms. Seals and repairs made with Aquasure generally last the life of the item.

Clean and dry surface, using Cotol 240 or isopropyl alcohol. Non-fabric surfaces such as latex should first be keyed with sandpaper, and then cleaned.

General and overall instructions for use:

    Apply using a brush, spreader or adhesive gun. (For use with adhesive guns use Cotol 240 High Viscosity (item No 12715)).
    For seams apply a 2mm thick bead, overlapping seam edges by at least 5mm. Apply with slight pressure to saturate fabric surfaces.
    For holes and tears, create backing with removable tape and fill void, overlapping void edges by 5mm. Remove tape after full cure.
    For patch application on fabrics and breathable laminate, apply Aquasure, then apply patch over damaged area. Wipe away excess adhesive.
    For high wear areas apply thin layer of Aquasure and apply patch.

Aquasure (28g) von SubGear (DE, Germany)

McNett Aquasure (28g) Neoprenkleber
[841110116]

McNETT Aquasure Neoprenkleber | Textilkleber

    Klebstoff für Textilien, Zelte, Neoprenanzüge und Schuhe
    In der praktischen 28 Gramm Tube
    Sehr einfache Anwendung

Artikelnummer
    SP 17, Scoprega Part number: R101017
Hersteller
    McNett
EAN
    021563101126

Beschreibung: McNett "Aquaseal"
Inhalt: 28g
Verpackung: Tube

Aquasure (28g) von SubGear
Der elastische Klebstoff "Aquasure" ist weltweit akzeptiert als der »Industriestandard« für den Wassersport. Aquasure ist eine einzigartige Urethanmischung, die hervorragende Klebeergebnisse garantiert und auch zum großflächigen Beschichten geeignet ist. Die dauerhaften Klebestellen sind abnutzungssicher, flexibel, wasserfest, und werden nicht beeinflusst von Hitze oder Lösungsstoffen. Für Neopren, Gummi und anderen Materialien, 28g Tube.

Zur Abdichtung und Reparatur aller Wasser-Materialien wie z.B. Neopren, Gummi, etc. können Sie dieses Präparat verwenden. Dichtet exzellent und bietet gute Haltbarkeit - wie alle Produkte von McNett. Wird in USA unter dem Namen 'Aqua Seal' verkauft.

Einsatzgebiete:
Verklebung und Abdichtung von zB. Neopren

Vorteil:
Leicht zu verarbeitender Klebstoff mit speziell abgestimmten Klebeeigenschaften.

Grundpreis 100g 35,53 Euro

UVP: € 11,50 = 13.48 % Ersparnis
€ 9,95
Preise inkl. MwSt. zzgl. Versand